fenix 5x APAC 업데이트 6 -> 11.00

fenix 5x APAC 업데이트 기록

업데이트는 WebUpdater를 통해 할 수 있다.: https://itunes.apple.com/us/app/garmin-webupdater/id477318609?mt=12

현재 버전: 6.00

새 버전: 11.00 (7.71MB)

Please make sure the batteries in your Garmin device are fully charged before installing this software update. If the batteries fail during the update process, your device may become unusable and have to be returned to Garmin for service.

---

Changes from version 9.30 to version 11.0:

Added GPS GALILEO support (Activity Settings > GPS). (Requires GPS version v2.30)

Added support for Connect IQ SDK v3.0.

Added abnormal heart rate alerts. Enable these in Heart Rate widget > Heart Rate options > Abnormal HR alert. An abnormal heart rate will be detected if your heart rate exceeds the entered threshold for an extended period of time while sedentary.

Added support for canned text replies when responding to text messages or incoming phone calls (Android users only).

Made improvements to pool swim distance accuracy.

Fixed an issue where Heart Rate broadcast would stop working after 10 seconds if returning to the watch face from the Sensors and accessories menu.

Fixed an issue where GPS related training options were accessible from certain indoor sports.

Fixed an issue where the device could crash when processing malformed activity files.

Fixed an issue where certain settings changes on device were not making it to Garmin Connect as expected.

Fixed an issue where the interval pace data field could be dashed out during a Pool Swim activity.

Fixed an occasional issue where the displayed lengths or distance during a pool swim could briefly show incorrect values.

Fixed an issue causing Cadence values to be 'stuck' when not pedaling.

Fixed an intermittent crash when viewing SwimRun activities.

Fixed an issue causing some activities performed on multiple devices to be double-counted when viewing Training Load on Physio TrueUp devices.

Fixed a rare issue which could cause the watch to restart at the end of certain workouts.

Fixed potential UI issues

Fixed a potential issue where sensor hub would upgrade fail occasionally

Changes from version 9.2 to version 9.3:

Fixed a potential UI issue.

Changes from version 8.00 to version 9.20:

Added Physio TrueUp support. Physio TrueUp syncs activities done on other Garmin devices, allowing your device to more accurately reflect your training status and fitness. Activities from other devices will appear in the Activities menu, and they will update your Totals for Running, Cycling, and Swimming. Your Training Status, Training Load, and VO2 Max will be updated using activities from your other devices, and your Recovery Time will be also updated using data from other devices supporting Physio TrueUp. Enable Physio TrueUp in Settings > Physiological Metrics on the device or in Device Settings on Garmin Connect Mobile.

Added support for communication with a Garmin Xero A1i Bow Sight. The Bow Sight is capable of sending Laser Locate waypoints to the watch. These are accessible from the XERO widget (Settings > Widgets > Add Widgets > XERO) and can be further used to navigate to.

Added support for communication with a Garmin inReach Mini. (Settings > Widgets > Add Widgets > inReach) The widget acts as a remote and allows one to send preset texts, customized quick texts and trigger a SOS message.

New Beta Feature! Extended Display will allow you to display your data screens on your Garmin Edge during a multisport activity. Enable Extended Display mode on a supported Edge, and pair it to your watch as an Extended Display sensor.

Added support for REM sleep phase detection and improved the accuracy of the existing sleep algorithm.

Added support for selecting alternate locations within the Sunrise and Sunset widget. (Widget > Menu > Location)

Added the ability to save Stopwatch recording as an activity. Go to the Stopwatch control, and start the timer. Stop the timer, and select Done. You can then save your activity, which will appear in your History.

Added support for Garmin Vector 3 power meter software updates.

Added the Kayak app.

Enabled the Auto Set setting for Strength activities. To access this setting, go to your Strength Settings, and select Auto Set. When enabled, sets automatically advance during free Strength activities.

Enabled the Edit Weight setting for Strength and Cardio activities. To access this setting, go to your Strength or Cardio settings, and select Edit Weight. This setting will control whether you can edit the weight when editing sets.

Fixed an issue preventing some periods of rest from being correctly detected in all-day stress measurements.

Fixed an issue that could cause the time and date to be incorrect.

Fixed an issue causing repeated 'Wheel Size Computed' notifications when connected to a speed sensor.

Fixed an issue preventing the elevation graph from updating during certain activities.

Fixed an issue that could cause 0 to be displayed in the Grade data field.

Fixed a possible crash that could occur when downloading stored heart rate data from a Garmin HRM-Tri or HRM-Swim.

Fixed an issue where the device may crash while connecting to ANT sensors.

Improved the accuracy of the pace/speed target gauge during workouts.

Fixed a potential issue in long activity

Fixed a potential language missing issue

Remove Daylight Saving Time for Russian time zones

Changes from version 7.70 to version 8.00:

Added support for a Sunrise & Sunset widget. Settings > Widgets > Add Widgets > Sunrise & Sunset.

Added support for an Alternate Time Zones Widget. Settings > Widgets > Add Widgets > Alt. time Zones.

Added a setting to display a calibration prompt when using a power meter. When using a Vector, this will also allow the user to set the power meter crank length. Menu > Settings > Sensors & Accessories > Power Meter > Calibration Prompt.

Improved Bluetooth connectivity with Huawei phones.

Improved the accuracy of resting heart rate measurements.

Fixed an issue where the altitude on device wasn't accurate when using the Jumpmaster app.

Fixed an issue where Flashlight would turn off when using gestures.

Fixed an issue where Broadcasting Heart Rate was not working as expected, if accessed from the power controls menu.

Fixed a potential issue in long activity

Changes from version 7.10 to version 7.70:

Added the ability to access 'Broadcast Heart Rate' from the Controls menu (Settings > Controls) as well as through the system Hot keys (Settings > System > Hot Keys).

Added remote display support for the Estimated Total Distance data field.

Improved syncing of user settings and statistics between the device and Garmin Connect. Addresses issues like alarms being changed unexpectedly.

Improved the accuracy of All-Day Stress tracking.

Improved the smart notification text layout for longer messages.

Improved manual weight entry for Rep Counting. When entering the weight for a set, the default value will be the weight entered for the previous set instead of 0.

Improved the VO2 Max gauge in the Performance widget so that the arrow indicator is more accurate.

Fixed an issue where the elevation graph did not update during a course if the user stayed on the elevation page.

Fixed an issue where the Heart Rate graph would intermittently stop updating.

Fixed an issue causing the Lactate Threshold page in the Performance widget to not show if an auto-detected BPM value is the same as one that was manually entered.

Fixed an issue where the entered angle field would change its contents to a bad value within Jumpmaster.

Fixed an issue where the scrollbar would disappear momentarily when adding a chart page (for example altimeter) to the activity data field page loop.

Fixed an issue where the data field 'Gear Battery' showed no value on the Varia Vision.

Fixed an issue where laps were not being recorded correctly while performing a lactate threshold test.

Fixed an issue where the scorecard can't be uploaded if pause the round during round.

Fixed an issue about character corruption by full-width zero.

Fixed an issue where the activity name showed in English.

Changes from version 6.00 to version 7.10:

Improved the stability of CIQ watchfaces.

Fixed an issue where one couldn't create a course using saved locations on device.

Fixed an issue where certain courses downloaded through a CIQ application were failing to load on the map.

Fixed an issue where ConnectIQ watch faces would intermittently fail to load from the watch face selection menu.

Added support Connect IQ SDK v2.4.

Added elliptical, stair, floors climbed, and yoga activities.

Added support for configuring 'Off Course' alerts. (Settings > Navigation > Alerts > Off Course.)

Added the ability to set an alert that occurs at the start of every hour. Go to Settings > System > Time > Alerts, and enable the 'Hourly' option.

Added support for setting up Alarm Clock as a Controls and a Hot Key item. Go to Settings > System > Hot Keys or Settings > Controls > Add New to enable this.

Added a setting to control whether segment start pins are viewable on the Map page. Go to Settings > Activities and Apps > Run/Bike > Run/Bike Settings > Map. Turn off 'Use Sys. Settings.' You can now toggle 'Draw Segments.'

Improved Training Status and Training Load to now be updated with heart rate data that is stored on an HRM-Tri or HRM-swim and sent to the watch.

Fixed an issue with editing coordinates on some languages.

Fixed an issue where Autoshot detection and Measure Shot features were not working as expected.

Fixed an issue where hourly alert was showing incorrect time intermittently.

Fixed an issue where the All day Stress widget was missing on Quatix 5 devices.

Fixed an issue where one could access the 'Set time with GPS' option in the Controls menu while executing an Indoor activity.

Fixed an issue where activity uploads were not functioning as expected after a reconnection to the phone.

Fixed an issue where the dog widget seldom displays random symbols for dog names followed by a crash.

Fixed an issue where the connection error image on certain widgets did not look correct.

Fixed an issue causing step numbers to be displayed incorrectly in Strength workouts.

Fixed an issue where All Day Stress was being logged during an activity.

Fixed an issue where waypoint names would show invalid characters when imported from Basecamp.

Fixed an issue where smart notifications were truncated incorrectly for certain languages.

Fixed a potential issue where long SwimRun activities could produce corrupt FIT files.

Fixed an issue where certain maps would fail to load if their names contained certain foreign characters.

Set English as the default language for SEA.

Fixed an issue where APAC characters would display incorrectly in waypoint page

Fixed a potential issue in long navigation

Fixed an issue where newly created activity was unable to be used

Fix a display issue in Golf previous shot page

Changes from version 5.40 to version 6.00:

Added support for Rep Counting during Strength and Cardio workouts which can be created on Garmin Connect Web and Garmin Connect Mobile. To enable Rep Counting, ensure that Settings > Activities & Apps > Strength > Rep Counting is enabled. Start the timer to automatically count reps during sets. Press the lap key to rest between sets. You can edit your last set's number of reps and weight during a rest period. Press the lap key to advance to the next set.

Added support for All-Day Stress. To view the Stress widget, hold the Up key from any widget, and select Add Widget > Stress. You can view your current stress measurement on the widget page. Press the enter key to view a graph of your stress over the last four hours. Press Down to access the Four-Fold Breath relaxation timer.

Added support for setting up Wi-Fi Networks on device. After syncing with Garmin Express or Garmin Connect Mobile at least once, go to Settings > Wi-FI > Add Network to search for Wi-Fi networks. Select a network. If the network is secure, enter its password to join it.

Added support for manual calibration of the Barometer. (Settings > Sensors & Accessories > Barometer > Calibrate)

Added support for Hourly Alerts. (Settings > System > Time > Alerts > Hourly)

Added support for configuring the track color of saved activities. (Settings > Map > Track Color)

Improved device key handling while using Connect IQ apps.

Improved the course navigation icons for better visibility and contrast.

Fixed an issue causing Varia UT800 Smart Headlights to periodically disconnect or power off during a ride.

Fixed an issue causing the Running Dynamics Pod to disconnect when using Connect IQ Apps.

Fixed a potential issue preventing a course from being joined when not joining it at the start.

Fixed a potential issue causing Personal Records to be reported inaccurately.

Fixed an issue where the device would not transition to the climb screen while using Auto Climb in certain situations.

Fixed an issue where the sunrise and sunset alarms were not working as expected.

Fixed an issue where the elevation plot for a single activity in a multisport, would display the elevation history of the entire activity.

Fixed an issue where certain artifacts were being drawn on the map page while panning or zooming.

Fixed an issue where the device might crash when editing settings for a multisport activity during a transition.

Fixed an issue where the map would not refresh course data if it was edited during active navigation.

Fixed a potential issue where the watch may appear frozen on the watchface, when exiting out early from an active course route calculation.

Fixed a potential issue preventing some Training Status data from being uploaded to Garmin Connect.

Changes from version 4.20 to version 5.40:

Added support for Treadmill Calibration. When saving a Treadmill running activity for the first time, you will be given the option to enter the distance that the treadmill recorded. This will improve the accuracy of the distance that the watch records during future treadmill activities. You can also choose to calibrate when saving any treadmill activity. When you are done with your activity, stop the timer, scroll down to 'Calibrate & Save.' Then, enter the distance that the treadmill recorded. For accuracy, these options become available when recording an activity longer than 1 mile or 1.5 kilometers.

Added support for Connect IQ SDK 2.3.2.

Added support for viewing distances to Golf hazards and course targets.

Added support for persisting Heart Rate data on the widget across a power cycle.

Added support for viewing smart notifications on Varia Vision.

Added support for configuring the Controls menu with more than 10 items.

Added support for accessing Altimeter, Barometer and Compass widgets through the Controls menu.

Added support for adjusting the device backlight using the Controls menu.

Added support for 'Flashlight'. This will be accessible from the System Hotkeys and the Controls menu.

Improved the altimeter and barometer locking mechanism for water sport activities.

Improved the readability of long golf course names on device.

Fixed an issue where the user might see a blank black banner while navigating a shorter course.

Fixed an issue where the device would crash when attempting to continue a paused golf round.

Fixed an issue where the Virtual partner page was being incorrectly added to the activity data page loop while navigating.

Fixed a potential issue where large elevation values were being reported on the summary page for certain activities.

Fixed a potential issue where certain activities would show extremely high total elapsed time when trying to save them.

Fixed an issue where the gesture backlight was not working as expected during Do Not Disturb.

Fixed an issue where the heart rate target gauge would not work as expected during a workout when using wrist based heart rate.

Fixed an issue where the directions displayed on the Dog Tracker widget would not update in real time.

Fixed a potential issue where the data field page may have ghost lines when visiting the DogTracker page during an activity.

Fixed an issue where the device may not respond to button presses when using the lap key during a lap Swimming workout with Drill log disabled.

Fixed an issue where the backlight would turn off (outside of an activity) even though the backlight setting was set to 'No Timeout'.

Fixed an issue where routes created on Basecamp did not have elevation information after being transferred to the device.

Fixed an issue where the device would appear to be frozen, when connected to a computer.

Fixed an issue where the cog value could not be set to a value higher than 45, while setting up a Shimano Di2 Shifter.

Fixed an issue in which optical heart rate became much less precise during an activity if Connect IQ apps were installed on the watch.

Fixed an issue in which the prompt to enter scores between holes during Golf activities was not shown

Changes from version 4.10 to version 4.20:

Add support for Japan cycling course 

Add support for course loading tips

Improved Vietnamese Font display quality

Fixed a potential issue that lap point was off course when activity was uploaded to GC

Changes from version 3.40 to version 4.10:

Added support for Connect IQ 2.3.1 SDK. See the Connect IQ 2.3.1 SDK for a list of new features.

Added support for pre-defined Alarm labels. (Menu > Clock > Alarm Clock > Select an alarm > Label)

Added support for new VIRB remote commands.

Added support for adding widgets through the context menu. (Scroll to a widget > Menu Key)

Improved the VIRB widget to accurately reflect the settings available on the connected VIRB, which may vary with model.

Fixed an issue where the activity summary information for multisport profiles only represented data from the last leg.

Fixed an issue where the device screen seems to pulsate when using a white background, in low power mode.

Fixed an issue where ConnectIQ data fields were not able to record information to FIT files.

Fixed an issue where the HMD configuration won't match what is being displayed on device.

Fixed an issue where the device backlight would not work as expected when Do Not Disturb was enabled.

Fixed an issue where the 'Lap Ascent' field was not displaying valid data on the lap alert page.

Fixed an issue where the Indoor Row summary information was displaying distance metrics, instead of stroke data.

Fixed a potential issue where the device could freeze when dismissing multiple smart notifications.

Fixed a potential issue where the Training Effect value on post activity summary won't match the value shown on Garmin Connect.

Made various bug fixes and code improvements to improve stability.

Added support for weekly and monthly totals of Skiing, Climbing and Rowing( Menu > History > Totals > Down )

Added support for Truswing unit setting page

Fixed a potential issue where Fenix5X CIQ watch face was unable to show APAC characters

Changes from version 2.90 to version 3.40:

Added support for managing automatic software updates (Settings > System > Software Update > Auto Update). Setting Auto Update to 'Off' will disable downloads of software updates using Garmin Connect Mobile and Wi-Fi.

Added support for hiding the distance to next field, shown by default on the map page while navigating. (Settings > Navigation > Data Screens > Map > Data Field)

Added support for viewing navigation data pages on the Head Mounted Display (HMD).

Improved the power controls menu and introduced a 'disabled' state for connected features like Find My Phone, Music Controls etc. These applications will no longer disappear from the power controls menu, when the user has lost connection to the Garmin Connect Mobile App.

Added support for managing unit settings for pressure, altimeter and temperature from corresponding widget settings menu.

Improved the reliability of LiveTrack.

Improved the responsiveness of steps auto-goal.

Improved the activity settings menu by hiding GPS specific settings when GPS is turned off.

Fixed an issue where coordinate entry was not working correctly for Russian and Hungarian.

Fixed an issue, where the watch would incorrectly report that GPS signal was lost, while using UltraTrac.

Fixed a potential issue where the currently selected watch face may change after a software update.

Fixed an issue where the device could crash when applying a FaceIt watch face from the Garmin Connect Mobile App.

Fixed an issue, where the option to 'Copy Activity' was present in the main menu for non-copyable apps like Golf.

Fixed an issue, where the unit would crash when creating a custom alert for a new 'Other' app.

Fixed an issue, where the virtual partner fields, 'Time Ahead' and 'Time Behind' won't update during an activity.

Fixed an issue, where an empty elevation plot was being displayed during activity review for apps like, 'Rowing', which doesn't record elevation data.

Fixed an issue, where the device was calculating VO2 max for activities using UltraTrac.

Fixed an issue, where the option to 'Copy Activity' was present in the main menu for non-copyable apps like Golf.

Changes from version 2.60 to version 2.90:

Added support for GroupTrack with Livetrack. (Garmin Connect Mobile > Menu > Livetrack > GroupTrack.)

Added support for Bontrager bike lights.

Added support for 'Countdown Start' when using Pool Swim. (Settings > Activities and Apps > Pool Swim > Pool Swim Settings > Countdown Start)

Added support for recording FIT files with Golf activities.

Added instructional tips for the Training Status page and Performance widget.

Added support for Connect IQ apps to access Bike Light features.

Added support for Running Dynamics Pod.

Improved messaging for when a course exceeds the device's course point limit.

Fixed an issue with Virtual Partner not displaying time ahead/behind information correctly.

Fixed an intermittent issue where the Fenix device won't auto connect to the Mobile app after powering up.

Fixed a couple of scenarios where the 'In-activity' backlight settings were not being respected.

Fixed an issue where the device could crash while creating custom alerts for 'Other' apps.

Fixed an issue where Wi-Fi was still offered as a Hotkey on non-WIFI devices.

Fixed a potential issue with Portuguese and Hebrew keyboards.

Fixed a potential issue where LiveTrack does not stop after ending an activity.

Fixed crash that could occur when course files with special characters were loaded.

Fixed a potential issue where the device is not able to import certain GPX files.

Fixed an issue where one couldn't import files from Basecamp to the device.

Fixed a potential issue where a long course with segment data could crash the device.

Made general improvements to increase product stability.

Added support for wireless data sharing

Changes from version to version 2.60:

Fix miscellaneous UI issues

EULA

GARMIN(R) SOFTWARE LICENSE AGREEMENT

This download offers free firmware upgrades for select Garmin units. These upgrades are specific to the specific GPS units and software versions listed.

Warning:
This software should only be uploaded to the unit for which it is intended. If this software is uploaded to a GPS unit other than the product it is designed for, it might render the unit inoperative. If the software upload fails, and subsequent upload attempts prove unsuccessful, the unit may need to be returned to Garmin for service.

Software License Agreement

By downloading, installing, or using this software, you agree to be bound by the terms and conditions of the following license agreement. Please read this agreement carefully. Garmin Ltd. and its subsidiaries ("Garmin") grants you a limited, non-exclusive license to use the upgrade software ("Software") in binary executable form in the normal operation of the applicable Garmin products. Title, ownership rights, and intellectual property rights in and to the Software remain in Garmin. This license is personal to you and you may make copies of the software only for your personal use. You agree that this license agreement does not need to be signed for it to take effect. By using the software you manifest your acceptance of this agreement. The software is provided on an "as is" basis without warranty of any kind -- either expressed or implied -- including, without limitation, any implied warranties of merchantability or fitness for a particular purpose. Garmin does not warrant the performance of the software or that the software will meet your requirements or operate error free. You acknowledge that this Software is the property of Garmin and is protected under United States of America copyright laws and international copyright treaties. You further acknowledge that the structure, organization, and code of the Software are valuable trade secrets of Garmin and that the Software in source code form remains a valuable trade secret of Garmin. You agree not to decompile, disassemble, modify, reverse assemble, reverse engineer, or reduce to human readable form the Software or any part thereof or create any derivative works based on the Software. You agree not to export or re-export the Software to any country in violation of the export control laws of the United States of America.

The items or Software may contain information that is subject to the Export Administration Regulations (EAR) issued by the United States Department of Commerce (15 C.F.R., Chapter VII Subchapter C) and that may not be exported, released or disclosed to certain destinations and foreign nationals except in compliance with U.S. law. The preceding statement is required to be included on any and all reproductions in whole or in part of this item or Software.

크게 바뀐 것

크게 바뀐 것으로는 갈릴레오 GPS가 잡힌다는데 GPS + GRONASS만 있고 없다.

https://the5krunner.com/2018/06/22/garmin-fenix-5-gets-galileo-now-beta-for-5-5s-and-5x/

레퍼런스

https://buy.garmin.com/en-US/digital/p/560327#specs

Outdoor Wearable GPS Accuracy for Position, Distance and Speed Readings

https://www8.garmin.com/manuals/webhelp/fenix5x/EN-US/GUID-139CD52F-B25F-4002-B13D-ACF7FEA70A04.html manual > turn off bluetooth